Individually selectable test requirements for the simulation of selected scenarios (creating a performance certificate).
Individually selectable test requirements for the simulation of selected scenarios (creating a performance certificate).
The Aachen alliance “Aachen Network for Waste Water Reuse” (AIX-Net-WWR) was selected by the BMBF to interdisciplinary develop innovative solutions for wastewater reuse. PIA GmbH is part of this alliance and will work on monitoring technology and the development of a validation methodology in the coming years. More information on the project is available via » this link.
(Information only in German; for further questions please contact )
In November 2021, the standard DIN EN 16941-2:2021-11 On-site non-potable water systems – Part 2: Systems for the use of treated greywater was published.
This standard establishes requirements for the design, sizing, construction, installation, operation, and maintenance of graywater treatment systems.
The treated water can be used for garden irrigation, toilet/urinal flushing, washing and cleaning purposes.
Use of the treated graywater for purposes such as drinking water, personal hygiene water, or heat recovery is not permitted.
Annex D provides examples of water quality requirements for the various uses. This annex is an informative annex.
EN 16941-1:2018 On-site non-potable water systems - Part 1: Systems for the use of rainwater
This European Standard specifies the requirements and gives recommendations for the design, sizing, installation, identification, commissioning and maintenance of rainwater harvesting systems for the use of rainwater on-site as non-potable water. This European Standard also specifies the minimum requirements for these systems.
Ende November 2016 wurde der neue australische Grauwasser Standard veröffentlicht. Nach mehreren Jahren Bearbeitungszeit konnte der Standard fertiggestellt werden und beinhaltet neu erarbeitete Anforderungen an Grauwasseranlagen. Der zuletzt geltende Standard aus dem Jahr 2008 wurde ersetzt und alle in Australien geltenden Richtlinien wurden in den Standard aufgenommen, welche sich teils maßgeblich von anderen aktuellen Grauwasserstandards unterscheiden. Der Hauptunterschied liegt darin, dass im australischen Standard für die Prüfung reales Grauwasser verwendet wird und ein Challenge-Test mit synthetischem Grauwasser ergänzt werden kann.
Der neue Teil des australischen Standards, 1546.4:2016, ergänzt die Reihe um ein Prüfverfahren für häusliche Grauwasseraufbereitungsanlagen mit einer täglichen Behandlungskapazität von bis zu 1000 L/Tag.